In RF_NV_Manager program, click on Hex by Write NV button.You should see 18 digits in groups of 9.You can find your IMEI on your phone’s bill or the box your device came in. Now type your phone’s IMEI in Enter IMEI field.Click on File> Read supported RF NV items.If you do not see item 550, do not panic.Your phone’s IMEI number should appear on number 550 NV_IMEI_I Now navigate to C:/ Program Files/ qualcomm/ qpst/bin folder.Select the phone and click the Software Download option from Start clients menu.The port should come up on active phones. Your current port should show as COM4/5.Run QPST configuration and click on Ports tab.You can find this option under Settings> Developer options. Open the QPST_2.7_378 and run the setup file to install it on your computer.Download QPST (Qualcomm Product Support Tools) and unzip it.Now download the IMEI converter tool and unzip it.Installed on it, restore it to stock first. Make sure you LG G3 is running the stock LG firmware If your phone does not have official firmware.The imei of the device is 0.So you must restore it with QPST. [After it you will have a 2G network but no 3G\4G network because of The required software can be found here: įor the remaining steps you can follow everything after 06:00 from the afore-mentioned video ( ), or steps 1-28 after this line: ( Immediately you should see TWO Notifications Display: "LGE Android Phone" Under "Other Devices" with a yellow exclamation.įor this you have to use the proper version of QPST, that is: 2.7.378. (Not sure if this is necessary at all.but won't hurt to enable it anyway. It should automatically launch you to the hidden Menu., Then Go to your phone Dialer PAD and type in the code: *#546368#*855# (Replace 855 with the LG G3 model Number - 855 is the international model).Physically Connect your phone to the computer and set it to CHARGE ONLY (This is necessary).Go to Device Manager on your Windows Machine.Download LG United Mobile Driver or LG Mobile Driver.The solution for this is given in the following xda postīasically, following steps 1-7 from that post was sufficient for me (given that I had installed the latest version of LG drivers: LGMobileDriver_WHQL_Ver_4.2.0.exe) Solving this problem requires couple of steps:ġ) Accessing the hidden menu for LG G3 on Android Marshmallow 6.0 & enable DIAG MODE However, in those cases either the phone model is different, or the Android version on the device is different.
A solution for this problem has been given in multiple sources, such as: this, this, and this.
0 kommentar(er)
